TSC TDM-30 Supported Features
The TSC TDM-30 supports the features below
Sensor Position
Black mark on tob or bottom of the media can be callibrated using TSC TDM 30 printer.Its an added advantage compared to TSC Alpha 3R mobile printer.
Flexibility in Various Media Support
The adjustable media hanger with label fixing tab allows for a variety of media widths between 20 mm and up to 75 mm. TDM-30 can handle media including receipts, selected labels and MaxStick linerless printing etc.
Multiple Connectivity
TDM-30 supports USB2.0 + MFi Bluetooth 5 + passive NFC tag or USB2.0 + coexist 802.11 a/b/g/n Wi-Fi + Bluetooth 4.2+ passive NFC tag.
Ribbon & Media Capacity
Media type
• Reflective sensor model: Receipt paper, bline receipt paper (mark in printing side) & selected label
• Gap sensor model: Receipt paper, bline receipt paper (mark in printing side or backside) & Label with gap
Media width Max 80 mm (3.15”) *with media hanger: 20 mm (0.79’’) and 70 mm (2.75’’) (user option)
Media thickness 0.06 ~ 0.16 mm (2 ~ 6 mil)
Media roll capacity 40 mm (1.57") OD
Physical characteristics
Dimension 105.0 mm (W) x 49.5 mm (H) x 116.0 mm (D) 4.13”(W) x 1.95”(H) x 4.57”(D)
Weight 0.38 kg (0.84 lbs)
Black mark sensor positions
You have to use below command line to define black mark direction. if the black mark is on top, In this case you could send below command to printer.
SET BLINE TOP
BLINEDETECT
If you want to back default, please used below command
SET BLINE BOTTOM
Using the above command both the top and bottom black mark media can be used for TSC mobile printers. these features where not available with the previous release of TSC mobile printers
0 Comments